bettersize
Início > Produtos > BeVision S1

O BeVision S1 combina microscopia de luz e análise de imagem, fornecendo distribuições intuitivas e precisas de tamanho e forma de pós ou suspensões. Com uma ampliação objetiva de até 100x, até mesmo partículas tão finas quanto 1 μm podem ser analisadas e registradas com eficiência pelo BeVision S1.

Recursos e benefícios

  • Faixa de medição: 1 a 3.000 µm
  • 24 parâmetros diferentes de tamanho e forma de partícula
  • Modelos opcionais para diferentes aplicações
  • Medições secas e úmidas
  • Resultados em conformidade com a norma ISO 9276-6
  • Uma solução econômica para sua análise de partículas
  • Um software poderoso facilita seu trabalho
  • Relatórios personalizáveis para diferentes opções de avaliação

Vídeo

What is Image Analysis? Fundamentals of BeVision Series Video play

How to Install and Operate BeVision S1 Video stop

Overview of BeVision Series | Precision in Particle Vision Video stop

Visão geral

1) Por que o método de análise de imagens?

 

 
     
  • Fácil
    Capture uma imagem de partículas, identifique as partículas e, em seguida, meça seu tamanho e forma. Cada etapa da análise de imagem é fácil e clara.
  •  
 

 
     
  • Análise da forma
    Com base em uma visão direta das partículas, é possível analisar não apenas o tamanho das partículas, mas também sua forma.
  •  
 

 
     
  • Ver para crer
    O método de análise de imagem determina o tamanho e a forma de cada partícula individual e, em seguida, soma tudo para formar uma estatística. Os detalhes da distribuição do tamanho ou da forma das partículas podem ser fornecidos com precisão.
  •  
 

 

2) Por que o método de análise de imagem estática?

 

 
     
  • Visão clara
    Nos analisadores de imagens estáticas, os microscópios de precisão e as câmeras de alta resolução são especializados em imagens de partículas de alta qualidade.
  •  
 

 
     
  • Sensibilidade a partículas de tamanho menor
    O método de análise de imagem estática é sensível a partículas de tamanho inferior; é possível até mesmo estimar o tamanho de partículas de tamanho inferior.
  •  
 

 
     
  • Pequeno volume de amostra
    O método de análise de imagem estática requer um pequeno volume de amostras. Algumas gotas de emulsões ou alguns microgramas de pós são suficientes para fazer uma medição.
  •  
 

 

3) Parâmetros de tamanho e forma de partícula:

 

 
     
  • Parâmetros de tamanho
    Diâmetros equivalentes: diâmetro equivalente à área, diâmetro equivalente ao perímetro;
    Diâmetros de Feret: diâmetros máximo e mínimo de Feret, XLF ('comprimento');

    Diâmetros de Martin: diâmetros máximo e mínimo de Martin;
    Elipse de Legendre: eixos maior e menor;
  •  
 

 

BeVision S1 Size parameters

 

 
     
  • Parâmetros de forma
    Diferença de tamanho em 2 direções: razão de aspecto、razão L/W、razão de elipse;
    Semelhança com o redondo e semelhança com o retângulo: Circularidade, irregularidade, compacidade, extensão, proporção da caixa;

    Concavidade do contorno: Concavidade、convexidade、solidez;
    Para partículas alongadas: Alongamento、retidão;
  •  
 

 

BeVision S1 Shape parameters

 

 

4) Software BeVision: Insights visualizados para você:

 

BeVision S1 software

 

 

5) Aplicativos típicos:

 

BeVision S1 applications

Citations

  • Bettersizer 2600

    Functional redundancy as an indicator for evaluating functional diversity of macrobenthos under the mussel raft farm near Gouqi Island

    DOI: 10.1016/j.aquaculture.2023.740024 Read Article Go logo
    Zhejiang Ocean University | 2024
    Biological traits analysis (BTA) helps to evaluate the effects of different environmental variables on the traits-based functional composition of macrobenthos. However, research on functional traits of macrobenthos under mussel farming is limited. We investigated the spatial and temporal response of the benthic system in terms of taxonomic and functional diversity to environmental variables of farming and natural stressors resulting from suspended mussel farming near Gouqi Island of eastern China Sea. The functional traits of macrobenthic assemblages under mussel farming were characterized by “medium adult body size”, “vermiform body form”, “high flexibility”, “infauna”, “semi-motile”, “gonochoristic”, “surface deposit-feeders”, “carnivores”, “semi-motile burrowers”, and “tube-dwellers”. Functional redundancy was stable in response to mussel farming stresses among seasons, whereas species diversity showed efficient to evaluate natural variables. Functional diversity was significantly affected by farming stressors rather than natural variables, Further analysis using multivariate methods together with continuous monitoring were highlighted to evaluate the impacts of mussel farming. Our results reinforce the importance of macrobenthic species and functional traits analysis to evaluate human stresses driven impacts in offshore ecosystems. By analysing the environmental variables with different sources, independently, we concluded the main effects of human pressures on macrobenthic community. Such distinction could be particularly effective to isolate variable environmental descriptors and evaluate their effects on functional diversity, making the current approach promising for the evaluation of ecological effects of anthropogenic stressors in aquaculture areas.
  • Bettersizer 2600

    Degradation characteristics and utilization strategies of a covalent bonded resin-based solid amine during capturing CO2 from flue gas

    DOI: 10.1016/j.seppur.2023.125621 Read Article Go logo
    China University of Petroleum | 2024

    In this study, various types of degradation as well as attrition which are possibly encountered in a circulating fluidized bed temperature swing adsorption (CFB-TSA) process, were conducted experimentally to evaluate the stability of a resin-based solid amine sorbent. Other characterizations methods, such as elemental analysis (EA), Fourier transform infrared spectroscopy (FTIR) etc. were applied to further reveal the degradation mechanisms. The results showed that thermal degradation occurs from 140–160 °C due to the decomposition of amine group. The CO2-induced degradation occurs from a higher temperature of 160–180 °C accompanied by the production of urea. Hydrothermal stability is good below 130 °C, but the ionic impurities in steam crystalized on particle surface can accelerate the degradation. Oxidative degradation is the most harmful, which starts at a lower temperature of 70–80 °C with the formation of aldehyde. The existence of H2O in atmosphere can alleviate the oxidative and CO2-induced degradations. The employed sorbent has a very low attrition index of 0.05, which is 1–2 orders lower than typical commercial fluidized bed catalysts. Based on the results of stability evaluation, some design suggestions for proper utilization of this sorbent or other similar resin-based sorbents have been provided in an industrial CFB-TSA process.

  • Bettersizer 2600

    De-branching of starch molecules enhanced the complexation with chitosan and its potential utilization for delivering hydrophobic compounds

    DOI: 10.1016/j.foodhyd.2023.109498 Read Article Go logo
    Shihezi University | 2024
    The current study aimed to prepare the complexes between debranched-waxy corn starch and chitosan polymers (DBS-CS), and then investigated their corresponding structural characteristics, rheological property and potent application in Pickering emulsion. The results indicated that the existence of chitosan significantly inhibited starch short-range molecular rearrangement for all DBS-CS samples, which was manipulated by both debranching treatment and chitosan content. Interestingly, this is the first study to reveal that the outstanding peak at 1.8 ppm in 1H NMR spectrum for sample DBS-CS was gradually shifted towards a lower-field region following an increased chitosan content. Moreover, the debranching treatment shifted the crystallinity pattern from A-type to B-type and the relative crystallinity of DBS-CS decreased gradually with the increased content of CS. All samples had a pseudoplastic fluid and shear-thinning behavior with an enhanced shear resistance following the complexation. The DBS-CS was applied in a Pickering emulsion for showing a greater emulsifying stability and a lower gel strength than native NS-CS prepared emulsion. Importantly, the encapsulation ability of curcumin in the DBS-CS emulsion was significantly improved, followed by an increase of 15.45% for its corresponding bioavailability compared to the control. Therefore, this study might highlight a potential carrier for delivering the bioactive substances in a green pattern.
  • Bettersizer 2600

    Heat-induced aggregation behavior of wheat gluten after adding citrus pectin with different esterification degree

    DOI: 10.1016/j.foodhyd.2023.109420 Read Article Go logo
    Gansu Agricultural University | 2024
    Wheat gluten aggregation during heat treatment is beneficial to the final quality of gluten-based products. Exogenous pectin can affect gluten aggregation. However, the effect of pectin with different degrees of esterification on the heat-induced aggregation behavior of gluten and its possible mechanism are still unclear. Thus, the heat-induced aggregation behavior of gluten after adding pectin with different esterification degree was studied in this study. When the temperature was raised from 25 °C to 95 °C, pectin affected gluten aggregation and was related to the degree of esterification. Specifically, the results of rheological properties and particle size indicated that low-ester pectin improved the viscoelasticity of gluten and promoted gluten aggregation. Thermal properties revealed that enthalpy of gluten added with low-ester pectin (37%) increased from 92.96 J/g to 95.40 J/g during heating process. Structurally, the fluorescence intensity and surface hydrophobicity of gluten added with low-ester pectin (37%) were lower than those added with high-ester pectin (73%). In addition, low-ester pectin (37%) significantly increased the disulfide bond content (from 15.31 μmol/g to 18.06 μmol/g) and maintained β-sheet content of gluten compared with gluten alone at 95 °C, indicating that low-ester pectin was more likely to induce gluten aggregation. However, scanning electron microscope showed that the gluten added with low-ester pectin (46%) exhibited a denser network structure at 95 °C than that added with low-ester pectin (37%). These results will provide a theoretical base for the regulation of gluten aggregation and the quality of gluten-based products by pectin with different esterification degree.
Page 1 of 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 84
Go to

Recursos selecionados

  • Industry Solution
    Additive Manufacturing Solution Particle and Powder Characterization

    2024-02-28

    Additive Manufacturing Solution - Particle and Powder Characterization

    bigClick
  • Application Note
    Particle Size Analysis-Exploring the Impact of homogenization on Soy Milk

    2023-09-20

    Particle Size Analysis: Exploring the Impact of Homogenization on Soy Milk

    bigClick
  • Guidebook
    Sample preparation guide for wet measurement

    2023-03-09

    Sample preparation guide for wet measurement using the laser diffraction particle size analyzer

    bigClick

Mais recursos

Analisador de imagens relacionado

  • Bettersizer S3 Plus

    Bettersizer S3 Plus

    Particle Size and Shape Analyzer

    Measurement range: 0.01 - 3,500μm (Laser System)

    Measurement range: 2 - 3,500μm (Image System)

  • BeVision D2

    BeVision D2

    Dynamic Image Analyzer

    Dispersion type: Dry

    Measurement range: 30 - 10,000μm

    Technology: Dynamic Image Analysis

  • BeVision M1

    BeVision M1

    Automated Static Image Analyzer

    Dispersion type: Dry

    Measurement range: 1 - 10,000μm

    Technology: Automated Static Image Analysis