Ceramics
Instruments provided by Bettersize offer particle size analysis for ceramic products during the manufacturing.
In the production of ceramics, the appropriate particle size of the preform body, glaze, pigment and other properties can improve the quality of the products. The changes that can occur in the finished products, especially during sintering, largely depend on the performance of the initial powder, and are greatly related to particle size. The ideal particle size distribution of the preform body can improve the density of the structure and further enhance the strength of the porcelain, and the small particle size of the glaze can enhance the surface smoothness of the porcelain. When the particle size of the preform body and glaze reach the nanometer grade, the porcelain will show toughness, resulting in a wider range of applications of ceramic materials.
In the case of sanitary ware production, the final slip should not be over ground to create too many fines as these will block the pores in the mould, restricting excess water from exiting the mould and thus weakening the formed product when it goes to the furnace for firing.
In the ceramic material production process, particle size distribution, particle shape, powder characteristics, and other properties of preform body, glaze, and pigment can be measured accurately.
Curated Resources
Related Particle Size Analyzer
-
BeNano 180 Zeta Pro
Nanoparticle Size and Zeta Potential Analyzer
Technology: Dynamic Light Scattering, Electrophoretic Light Scattering, Static Light Scattering
-
Bettersizer S3 Plus
Particle Size and Shape Analyzer
Measurement range: 0.01 - 3,500μm (Laser System)
Measurement range: 2 - 3,500μm (Image System)
-
Bettersizer 2600
Laser Diffraction Particle Size Analyzer
Measurement range: 0.02 - 2,600μm (Wet)
Measurement range: 0.1 - 2,600μm (Dry)
-
BeVision D2
Dynamic Image Analyzer
Dispersion type: Dry
Measurement range: 30 - 10,000μm
Technology: Dynamic Image Analysis
-
BeDensi T Pro Series
Tapped Density Tester with a Wallet-Friendly Solution
Number of Workstations: 1-3
Tapping Speed: 100 - 300 taps/min
Repeatability: ≤1% variation
-
PowderPro A1
Automatic Powder Characteristics Tester
Operation Mode: Automatic
Tapping Speed: 50 - 300 taps/min
Repeatability: ≤3% variation
-
BT-Online1
Online Particle Size Analyzer
Dispersion type: Dry
Measurement range: 0.1 - 1,000μm
Accuracy: ≤1% (D50 of certified reference material)